ENVIRO INTERNATIONAL CORPORATION
GHAZIABAD,, UTTAR PRADESH, INDIA 201010
ph: 0091 - 9310744064, 9999213040
alt:
enviroin
The Forced Draft Cooler is basically gas to air heat exchanger. It is used to cool the exhaust gases from the Kiln, boilers etc. The hot gas passes through vertical tubes and ambient air is blown over the tube in number of modules for cooling the gas. There are two to four passes in the hot gas side depending upon the quantity of flue gas and its temperature. In conventional design where cold air is passed through horizontal tube bundle and hot flue gases Is blown over the tubes there is a loss of heat transfer co-efficient. Unlike the gas- conditioning tower, dry type forced draught cooler does not require water and water disposal is not a problem. There are number of FD Fans for cooling. Hence there is more flexibility in regulating air flow to maintain accurate exit temperature. Cooling tube banks are of vertical design with no chance of dust accumulation. All three modes of heat transfer i.e. radiation, conduction and convection are used simultaneously to dissipate heat thereby reducing less power consumption. Also there is no requirement of compressed air for system to clear any chokeage problem
Copyright 2014 ENVIRO INTERNATIONAL CORPORATION. All rights reserved.
ENVIRO INTERNATIONAL CORPORATION
GHAZIABAD,, UTTAR PRADESH, INDIA 201010
ph: 0091 - 9310744064, 9999213040
alt:
enviroin